Cinelifters

ProTek60 Pro O3 6S HD Cinelifter

The ProTek60 Pro O3 6S HD Cinelifter from iFlight is a high-performance drone designed for professional videography. It features the DJI O3 Air Unit for low-latency digital transmission and 4K stabilized video with a 155° ultra-wide angle. The drone is equipped with BLITZ E80 4-IN-1 ESC, XING2 3110 power motors, and Nazgul 6x4x3 propellers. It has a 282mm wheelbase frame and weighs 1466 grams. The maximum speed is 110 Km/H, and it can hover for approximately 5.5 minutes with a 1.3KG load and a 6S 4500mAh battery. The drone also includes a GPS module and camera power supply module with short-circuit protection. It's compatible with a range of cameras and has protected propellers for indoor and outdoor use.

ProTek60 Pro O3 Specifications

FC: BLITZ F7 Pro Flight Controller

ESC: BLITZ E80 4-IN-1 Pro ESC

Video Transmission: DJI O3 Air Unit

Frame: 282mm wheelbase

Motor: XING2 3110 1600KV motors

Prop: Nazgul 6x4x3 propellers

Weight：1466grams

Max Speed: 110 Km/H (Manual Mode)

Maximum Takeoff Altitude: 3200 m

Max Hover Time: Approx. 5.5 mins with 1.3KG load and 6S 4500mAh battery

Max Wind Speed Resistance: Level 6

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: Dual Antennas

GNSS: GPS + Galileo

Limitations

The iFlight ProTek60 Pro HD 6S Cinelifter is designed to carry professional cinematic cameras such as the Komodo, Zcam, BMPCC, or even a GH5, making it suitable for high-quality video production. This drone is especially noteworthy for its ability to fly larger cameras that surpass the quality offered by GoPro. It is priced at $1,499.99 and offers features such as protected propellers for indoor and outdoor use, a universal camera mount, and a power distribution board with high capacitance and heat dissipation.

The drone includes big size XING2 3110 power motors and can reach speeds up to 110 km/h with a 1.5 kg payload, supporting a total lift-off weight of up to 3.5 kg. Its recommended battery size ranges from 6S 3700mAh to 6S 4400mAh, and it offers an estimated flight time of 3-6 minutes depending on the battery and take-off weight. The ProTek60 Pro also features a GPS module pre-installed, allowing for GPS rescue or INAV GPS RTH feature availability.

One limitation of the ProTek60 Pro HD is its relatively short flight time, which is a common constraint for drones carrying heavy payloads. The flight time varies based on the payload and flight style, so users need to plan their shoots accordingly to ensure they capture the required footage within the available time. Additionally, while the drone offers high performance and the ability to carry professional-grade cameras, it requires careful handling and an understanding of its capabilities and limitations for optimal use.

Taurus X8 Pro O3 8S HD Cinelifter

The Taurus X8 Pro O3 8S HD Cinelifter by iFlight is a high-performance drone designed for carrying DSLR or cinema cameras, such as the Red Komodo, Zcam, BMPCC, etc. It's equipped with DJI's FPV HD transmission system and features 8 single X-Class grade ESCs for power and reliability. The drone includes a GPS module and TPU landing gear, offering significant safety and functionality. It has a maximum payload of 2 kg and supports top-mounted cameras with an easily adjustable mount for perfect balance.

Big size XING2 3110 // The power motors with extreme lift and flight performance

8S power system // More power and speed

8x single X-Class grade ESC motor drivers for more reliability

Redundant iFlight ESC Commander PCB // Power distribution board with high capacitance, filtering and heat dissipation

GPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)

DJI O3 HD Air Unit Low-Latency Digital Transmission// 4K Stabilized Video with 155° Ultra-Wide Angle

Secured Battery Plug with Anti-Spark Filter

Universal camera mount and accessories for a wide range of cameras to install

Taurus X8 Pro O3 Specifications

FC: BLITZ F7 Pro Flight Controller

ESC: BLITZ E80 Single ESC (with CNC Alum Cover)

Video Transmission: DJI O3 AIR Unit

Diagonal Distance：464±2 mm(wheelbase)

Motor: XING2 3110 900KV motors

Prop: HQ 8*4*3 propellers

Weight: 2356±10g

Takeoff Weight: Approx. 3494±20g (With 8S 5000mAh Battery)

Dimensions (L×W×H): 428×249×74 mm

Max Speed: 150 Km/H

Maximum Takeoff Altitude: 3200 m

Max Hover Time: Approx. 5 mins with 8S 5000mAh battery and 1.5KG load.

Max Wind Speed Resistance: Level 8

Operating Temperature Range：-10° to 40° C (14° to 104° F)

Antennas: Dual Antennas

GNSS: GPS + Galileo

Limitations:

Key limitations and considerations for the Taurus X8 Pro include:

1. Payload Capacity: It has a maximum payload capacity of 2kg. While this is sufficient for a range of professional cameras, users should be mindful of the total weight of their camera setup to ensure optimal flight performance.

2. Flight Time: The estimated flight time is about 12 minutes without a camera and approximately 6-8 minutes with a camera. This relatively short flight duration is a crucial factor to consider, especially for longer shooting requirements.

3. Redundancy for Safety: The drone features redundant ESCs and motor setup for enhanced safety and performance. In case of an overload or failure, the remaining ESCs and motors can still carry the camera back safely.

4. GPS Rescue Feature: In situations of signal interference or loss, the GPS rescue feature takes over control, climbing to maximum flight altitude and returning to the takeoff point. However, it's important to note that this doesn't include automated landing.

5. Landing Gear: The integrated TPU landing gear provides sufficient height for most terrains and offers protection during harder landings.

6. Camera Mounting and Vibration Damping: It comes with a universal camera mount compatible with a wide range of cameras. The silicon-ball dampened carbon camera base reduces vibration, although additional software stabilization might be needed for the perfect shot.

7. Speed and Power: The drone is powered by an 8S power system and features big XING2 3110 motors, offering impressive lift and flight performance.

8. Pre-Tuned and Pre-Setup: The Taurus X8 Pro comes pre-tuned and pre-setup with basic PID and filter tuning for a good flight experience, and GPS Rescue is enabled by default.

The Taurus X8 Pro 8S HD Cinelifter is a specialized piece of equipment aimed at professional users who require a reliable platform for heavy, high-quality cameras. While it offers significant capabilities, understanding its limitations, particularly around payload capacity and flight time, is essential for optimal use.

Taurus X8 Pro 8S HD Cinelifter

The iFlight Taurus X8 Pro O3 BNF 8S HD Cinelifter is a high-performance drone designed for professional use, particularly for carrying DSLR or cinema cameras like the Red Komodo, Zcam, and BMPCC. This drone features several advanced specifications that make it suitable for high-quality cinematography and demanding aerial tasks.

Key specifications include:

1. Flight Controller: The Taurus X8 Pro is equipped with a BLITZ F7 Pro Flight Controller, which supports smart audio and IRC Tramp VTX protocol. It has a mount pattern of 35*35mm with a 4mm PCB hole diameter and includes a 512MB BlackBox for data logging.

2. Electronic Speed Controllers (ESC): The drone uses two iFlight ESC Commander PCBs, each with four BLITZ E80 Single ESCs. These support up to Dshot600, Proshot, Oneshot, and Multishot, providing reliable and high-performance motor control.

3. Motors and Propulsion System: It is powered by big size XING2 3110 motors, which deliver extreme lift and flight performance. The 8S power system offers more power and speed, essential for carrying heavy payloads.

4. Payload and Mounting: The Taurus X8 Pro can carry a maximum payload of 2kg, making it ideal for various top-mounted cameras. The camera mount is adjustable, allowing for fine-tuning the center of gravity for different camera setups.

5. Safety and Redundancy Features: The drone features a redundant motor and ESC setup, ensuring that even in the case of an overload or failure, the remaining components can safely return the gear. Additionally, it has a GPS module pre-installed for GPS rescue or INAV GPS RTH (Return to Home) functionality, providing an extra layer of safety in case of signal loss.

6. Transmission System and Video: It includes the DJI O3 HD Air Unit, offering low-latency digital transmission and 4K stabilized video with a 155° ultra-wide angle.

7. Additional Features: The Taurus X8 Pro comes with integrated TPU landing gear for most terrains and has an anti-spark secured battery plug. Its silicon-ball dampened carbon camera base helps reduce vibrations.

8. Recommended Accessories: It is recommended to use HQ 8x4x3 Macroquad props and an 8S 5000mAh battery for optimal performance.

This drone is pre-tuned and pre-setup, with Angle-Mode enabled by default for easier control during initial flights. It's designed for professional filmmakers and aerial photographers who need a reliable, high-capacity platform for their camera equipment.

Specifications:

GPS module: iFlight M8Q-5883-GPS & Compass V2.0 (LINK)

Total Dimensions: 428mm*249mm (body dimension)

Upper(middle) plate thickness: 3.5mm

Weight: 2.3kg±5g (without battery)

Bottom plate thickness: 3.5mm

BLITZ F7 Pro Flight Controller

Motor: XING2 3110 900KV

Top plate thickness: 3mm

Arm Thickness: 8mm

Propeller size: 8 inch

Wheelbase: 450mm

Limitations:

The iFlight Taurus X8 Pro 8S HD Cinelifter is a high-end drone designed primarily for professional cinematography, capable of carrying substantial payloads like DSLR or cinema cameras (e.g., Red Komodo, Zcam, BMPCC). This drone is notable for its DJI FPV HD transmission system and robust build, including 8 single X-Class grade ESCs for enhanced performance and reliability. Additionally, it features redundancy in its ESC and motor setup, adding an extra layer of safety, particularly important when carrying expensive cinema gear.

However, like any high-performance drone, the Taurus X8 Pro 8S HD Cinelifter has certain limitations:

1. Flight Time: The estimated flight time varies based on the payload. Without a camera, it can fly for approximately 12 minutes, but this reduces to 6-8 minutes when equipped with a camera. This is a key consideration for planning longer shoots or requiring continuous aerial coverage.

2. Payload Limitations: While the drone can carry a maximum payload of 2kg, users must carefully balance the weight to maintain optimal flight performance. The drone's performance, including maneuverability and flight time, can be significantly affected by the payload weight and distribution.

3. Vibration Damping and Camera Stability: Although the drone features a silicon-ball dampened carbon camera base to reduce vibration, additional software stabilization (like Reelsteady or Gyroflow) or a hardware module (such as SteadXP) might be required for achieving the desired cinematic shot quality.

4. GPS Rescue Feature: In cases of signal interference, radio signal loss, or complete FPV transmission failure, the GPS rescue feature takes over. However, it's important to note that this does not include automated landing, and manual control is necessary once the transmission is regained.

5. Configuration and Tuning: The drone comes pre-tuned and pre-setup with basic PID and filter tuning, and Angle-Mode is enabled by default to facilitate easier control during initial flights. However, for advanced users looking to customize their flight experience, understanding and adjusting these settings might be necessary.

These aspects are important to consider for anyone looking to use the Taurus X8 Pro 8S HD Cinelifter, especially in a professional capacity where reliability, flight time, and camera stability are crucial.